S125DLR-WS-24-A
http://mcsuministros.com/wp-content/uploads/2024/04/S125D-SERIES-1.pdf
SIRENA C/CIRCULINA GIRATORIA LED 140RPM 5 TONOS 24VDC 105dB IP54 AMBAR S125DLR-WS-24-A QLIGHT
• Ø125mm signal/ warning light and electric horn combinations provides both audible and visual signaling capability in one unit • Can select the proper signaling from a variety of light source and sound tone • Materials : Lens-AS, Housing-ABS, Reflector-Heat resistant ABS • Protection rating : IP54 • Compliant with RoHS directive (S125DLR/ S125DL) Common Specifications(S125DLR/ S125DL/ S125DS/ S125D) Various built-in sound tones of Warning sounds, Alarms and Melodies S125DL/ S125DS S125D S125DLR 54 5020 5030 105 • Revolving speed : 120-140RPM • Ambient operating temperature : -20°C to +50°C • Flashing rate : 60-80 flashes/min (Built-in switch for selection between steady and flashing mode) • Ambient operating temperature : -30°C to +50°C • Certificates : CE Compliant • Flashing rate : 60-80 flashes/min • Ambient operating temperature : -30°C to +50°C • Revolving speed : 120-140RPM • Ambient operating temperature : -20°C to +50°C • Certificates : CE Compliant S125DLR LED Revolving Light & Electric Horn S125DL LED Steady/Flashing Light & Electric Horn S125DS Xenon Lamp Strobe Light & Electric Horn S125D Bulb Revolving Light & Electric Horn ※ Please refer to Page22 for detailed specification of sound tones. S S125DLR-WS-24-A
S125DLR/ S125DL/ S125DS/ S125D-DC/AC Fuse EXTERNAL CONTACT Red(R) Amber(A) Green(G) Blue(B) White(W) Black(BK) Black(BK) White(W) Ch 1 Sound Pattern Ch 2 Sound Pattern Ch 3 Sound Pattern Ch 4 Sound Pattern Ch 5 Sound Pattern Common Power S125DL-DC/AC Red(R) Amber(A) Green(G) Blue(B) White(W) Black(BK) Black(BK) White(W) Ch 1 Sound Pattern Ch 2 Sound Pattern Ch 3 Sound Pattern Ch 4 Sound Pattern Ch 5 Sound Pattern Power Common Fuse NPN-Transistor EXTERNAL TRANSISTOR-NPN Wiring Instructions Technical Diagram • S125D series comes with prerecorded sounds. • For WV(5Customized Sounds)type, Input audio message needs to be provide by the customer prior to manufacturing. • S125DL model wiring can be done with either external contact or external transistors. • In case of wiring by using transistor, NPN transistor is needed and follow the wiring diagram on the right in order to wire properly. (Units : mm) Ordering Specification • External power line standard : UL1015 AWG18(0.75sq)×2C 400mm • External signal line standard : UL1007 AWG22(03sq) 400mm • DC type : Black output line is Negative(-) Do not apply voltage to each signal line. It may cause damage to the product. By default the warning light is turned on when the power is supplied, the voice/ alarm output is powered on by a separate connection. Please wire properly. S125D is applied to a large press machine control panel. S S125DLR-WS-24-A