Detector de Movimiento PIR Inalambrico IP65
The ESD is a battery operated PIR detector with a built in radio transmitter.
Each time the ESD detects movement it transmits a coded signal, which will operate easyswitch receivers.
The code also contains information, which tells the receiver if it is day or night and also how long to switch
the load on for.
Conclusion Detector de Movimiento.
Por lo tanto, The LIGHT SENSOR adjuster can be set to DAY to make an ON/OFF receiver work during daylight. If it is
set to NIGHT, only an ESB-1 bleeper will work during daylight and all other receivers will work only at night.
Do not turn the adjuster more than ¾ of the way anti-clockwise.
NB: Light levels are taken as an average over the last two minutes and therefore you will not be able to
simulate darkness by putting your hand over the lens.
Por lo tanto, The LIGHT SENSOR adjuster can be set to DAY to make an ON/OFF receiver work during daylight. If it is
set to NIGHT, only an ESB-1 bleeper will work during daylight and all other receivers will work only at night.
Do not turn the adjuster more than ¾ of the way anti-clockwise.
NB: Light levels are taken as an average over the last two minutes and therefore you will not be able to
simulate darkness by putting your hand over the lens.